BASIC FEATURES
Automatic Hold
With Automatic Hold set, when you are answering an outside call, pressing the trunk line or flashing Call
button will automatically put your outside call on hold and connect you to the next call.
You can set Automatic hold on your IP phone by following the procedure below.
1.
Press the [Transfer] button.
2.
Dial [1] [1] [0].
3.
To use this function, dial [0] [0] [1],
and if this function is not required,
dial [0] [0] [0].
4.
Press the [Transfer] button to save
the selected item.
NOTE
Page 58
- Intercom calls will be placed on hold by pressing the [Hold] or [Transfer] button.
If you press another trunk line button or flashing Call button while you are on an
intercom call, the intercom will be disconnected.
© SAMSUNG Electronics Co., Ltd.