Busy Station Callback - Samsung OfficeServ ITP-5021D User Manual

BASIC FEATURES

Busy Station Callback

When the called station is busy, you can set a busy station callback. When the busy station becomes free,
your IP Phone will ring. If you pick up the IP Phone, the other station will begin to ring.
1.
When you hear a busy signal, press the
[CBK] button or dial [4] [4]. Or, press
the Soft button corresponding to
[CBK] on the LCD panel.
2.
When you hear the confirmation signal,
replace the handset.
3.
When the reserved station becomes
free, your IP Phone rings.
The 'CALL BACK' message will appear
on the LCD screen.
4.
Lift the handset or press
the [Speaker] or [Send] button to
call the now idle station.
5.
To end the call, replace the handset
or press either the [Speaker] or [End] button.
NOTE
Page 46
If you do not answer the Callback within 30 seconds, the callback will be cancelled.
-
If a callback is set up, the [CBK] button's LED, if programmed, will light.
[CBK]
CALL BACK
© SAMSUNG Electronics Co., Ltd.