Samsung OfficeServ ITP-5021D User Manual page 24

6.
Select [2. IP] to display the current
IP address of the IP phone.
No address is displayed if an IP address
has not been set.
Use the dial buttons [0]~[9] and [*] to enter
a new IP address, and press the [Enter] button.
Be careful not to enter a duplicate IP address
since the network does not support
redundant IP addresses.
7.
Select [3. Netmask] to display the current
Netmask address of the IP phone.
To change the Netmask address, enter
a new address and press the [Enter] button.
8.
Select [4. Gateway] to display the current
Gateway address of the IP phone.
To change the Gateway address,
enter a new address and press
the [Enter] button.
© SAMSUNG Electronics Co., Ltd.
GETTING STARTED
Input IP Address
XXX.XXX.XXX.XXX
Input Netmask
XXX.XXX.XXX.XXX
Input Def. Gateway
XXX.XXX.XXX.XXX
Enter
Enter
Enter
Page 35