DETEWE OpenPhone 61 User Manual page 34

Features and MenuCards
the program-
Press and hold down
mable key ...
You will see the name of the feature
first (e.g. "Call diversion"). You can
edit the feature if you wish (e.g. you
can change the destination of the
diverted call). Select " New feature
to save a new feature to a key. The
Main menu appears. Select a feature
and, where necessary, enter the
variables (e.g. a telephone number).
"Save now" completes your pro-
gramming.
Linking Features
Main menu features and/or destina-
tions can be linked on programma-
ble keys. Linking means that you
program several features on the key
(up to five are possible). Pressing
the key later carries out all the
linked features on the programmed
key in sequence.
• : When leaving your
Example
workstation you want to acti-
vate call barring and call diver-
sion. To do this, you can link the
features as outlined below.
64 Programming Keys
the program-
Press and hold down
mable key, then select ...
: select " ". You can now
Link add
select either a feature or a destina-
tion. If you want to link further fea-
tures or destinations, select "
add
" again. When you have linked all the
desired features and/or destina-
tions, key in a name for the key next
to "Text". " Save now " completes
your programming.
When you now press the pro-
grammed key, the features will be
activated or deactivated, depending
on your programming. (In this
example, you will also need to key
in the PIN because you want to acti-
vate the call-barring feature).
Note : a second function key would
be required to deactivate call bar-
ring again and cancel call diversion.
The LED of a key with linked fea-
tures and/or destinations is not illu-
minated.
Stacking Features
You can "stack" main menu features
and/or destinations on programma-
ble keys. Stacking means that you
program several features on one
key. Pressing the key afterwards
" opens a MenuCard with the features
that have been saved. This means
that you can create your own Menu-
Cards (up to five entries are possi-
ble).
Press and hold down
mable key, then select ...
: select "
Stack
select either a feature or a destina-
tion. If you want to stack further
features or destinations, select
" add " again. When you have
stacked all the desired features
and/or destinations, key in a name
for the key next to "Text". "
" completes your programming.
now
Note : the LED of a key with stacked
features and/or destinations is not
illuminated.
Features and MenuCards
the program-
". You can now
add
Save
Programming Keys 65