Protection" Menucard - DETEWE OpenPhone 61 User Manual

Features and MenuCards
4 +/- En-bloc dialling
You can use this menu item to
switch en-bloc dialling on and
off. When en-bloc dialling is on,
you can enter telephone num-
bers on-hook, i.e. without
dialling them immediately, cor-
rect them if necessary and then
dial by lifting the handset or
pressing the hands-free key or a
call key. When en-bloc dialling is
off, direct dialling is active, i.e.
when you key in a digit, you
automatically seize a line.
5 Cost/duration
You can select " Cost " (call charge
is displayed), " " (the
Duration
length of the call is displayed) or
" Off ".
6 Peripherals
If you have connected an add-
1
on adapter and are using it to
operate add-on devices, you
must select the add-on device
you are operating under the
" Add-on selection " menu item
(e.g. headset or loudspeaker).
You can adjust the volume for
this device under " Add-on loud-
". If you want to use the
ness
add-on adapter's built-in relay,
you must define the relay func-
tion under " ":
Relais selection
Door display
If this function has been activat-
50 Main Menu
ed, the switching contact is acti-
vated as soon as your system tele-
phone is seized.
Record
If this function has been activated,
you can program a function key
(Settings/Peripherals/Add-on
adapter/Record) to start or stop
recording during a conversation.
2 If you have connected a V.24
adapter, you can use this menu
item to configure the V.24 inter-
face.
3 A range of terminal mode appli-
cations is offered here: informa-
tion on functions and operation
can be found in the documenta-
tion of the corresponding applica-
tion. In order to operate these
applications, you must always pro-
gram function keys.
7 Display
Then select , ,
Contrast Language
Call variant or Call team .
You use " " to adjust the
1 Contrast
display contrast with the key (or
by entering digits).
2 You use " Language " to select the
display language.
3 You use +/- Call variant to acti-
vate or deactivate the display of
the call variant permanently. If
call-variant display is activated,
the call variant appears in the
info line.
4 You use +/- Call team to acti-
vate visual call signalling (i.e.
display the caller's name or tele-
phone number) for all MULTI-
PLE keys and "Team" direct call
keys on which team ringing has
been deactivated.
0 +/- DTMF auto.
If you often have to post-dial
digits when touch-tone dialling
(also called DTMF post-dialling)
during a call, to access a voice-
box or an answerphone, for
example, you can switch your
telephone over permanently. On
internal and ISDN lines you can
post-dial immediately during a
call; on all other lines, post-
dialling is possible about five
seconds after the start of the call.
Features and MenuCards

"Protection" MenuCard

1 +/- Call blocking
Switches call signalling
on/off
for all telephone numbers on
your telephone and/or INTER-
NAL / EXTERNAL keys. Call
blocking can be activated for
internal calls, externals calls or
all calls (int. + ext.). When you
lift the handset you hear a spe-
cial dialling tone.
Note: if any of these telephone
numbers (call keys) are assigned
as MULTIPLE keys on other ter-
minals, then this call blocking
automatically applies to those
keys too.
2 Block call key
From the list you select the call
key for which you want to
switch call blocking on or off.
You can also press the corre-
sponding call key. Call blocking
can be activated for internal
calls, external calls or all calls
(int. + ext.). A pictogram on the
left of the key label indicates
active call blocking (pictogram
®).
Note: if the INTERNAL / EXTER-
NAL key is assigned to other
telephones as a MULTIPLE key,
then this call blocking automat-
ically applies to those keys too.
Main Menu 51