...4 ELECTRICAL CONNECTIONS
4.5 Selecting the Mains Voltage
4.5.1 Wall-/Pipe-mounted Instruments – Fig. 4.6
Remove front
Slacken captive screws
and remove
2
protection covee
Fig. 4.6 Selecting the Mains Voltage – Wall-/Pipe-mounted Instruments.
4.5.2 Panel-mounted Instruments – Fig. 4.7
Slide instrument
out of case
3
1
2
Remove plug
(if fitted)
Undo captive
screw
Fig. 4.7 Selecting the Mains Voltage – Panel-mounted Instruments
12
4
panel
3
1
Remove cover (see Fig. 4.1)
Remove cap
3
and screw
flat-bladed screwdriver to remove
the screw cap from the case.
Select the mains voltage
5
required
Remove front
panel screws
4
Information. Use a small,
2 3 0 V
1 1 5 V
Select
the mains
voltage
required