Telephoning With Several People - BinTec elmeg S560 Manual

15 Dialling
• No PCM channel is linked to a direct IP-to-IP connection for an SIP provider.
• Telephone calls are not routed via the Codec G.711 on IP connections or the DMTF signalling is outband (for other
Codecs DTMF recognition may not function correctly!).
Functions of the * key on the "mobile subscriber".
The * key is interpreted by the "mobile subscriber" as an R-(flash) key and, depending on connection status, can ex-
ecute the following functions:
In the call status:
In the hold for enquiry dialling
status:
In the hold for enquiry call
status:
In the inquiry call status:
In the hold for enquiry-engaged
status:

15.17 Telephoning with several people

15.17.1 Call waiting
If you have enabled call waiting for your system telephone (see
callers during an existing connection.
You can accept, reject or transfer a waiting call to another extension. If you already have two connections on your
system telephone, you cannot transfer (pass on) any more calls .
72
Initiate inquiry/hold.
Dialling abort -> busy tone.
Terminate caller. Back to connection on hold.
Disconnect existing connection, return to call on hold.
Return to held connection (call).
You are in a call.
Another call is signalled in the display (S560 only) by
You can accept or reject the call, leave it but switch off the call waiting tone, forward it or
accept it secretly.
Use the softkey to go to the next menu.
Call waiting on page 44), you are available to other
System telephones elmeg S560 / elmeg S530
bintec elmeg GmbH
.