Service - BinTec elmeg S560 Manual

12 Menu
Acknowledge tone - Volume
On your system telephone you can adjust the volume of the acknowledge tones.
Previous steps: Menu -> Sound ->Tones-> Acknowledge tone

12.6 Service

12.6.1 Device info
Here you can view the system telephone's current data.
Previous steps: Menu -> Service ->Device info
12.6.2 Firmware download
The firmware for the system telephone can only be downloaded through the elmeg hybird configuration. During any
download, the elmeg hybird rejects calls. All the features that have been set up are cancelled and key locking is ac-
tivated. Existing calls remain in place.
54
menu.
Press the +/- keys to set the desired volume. You can monitor the setting in the display
using the entry bar. The value set is shown as a number, on the right next to the entry
bar.
The settings range from 1 - 10.
The OK key is used to save the volume, and you go back to the
menu.
Select with the Navigator.
Use the "Right" Navigator to display the next menu for the selected row.
Use the Navigator to select the function you wish to edit.
Use the "Right" Navigator to display the next menu for the selected row.
Select the device info with the Navigator.
: The name that has been given to the system telephone.
: This serial number can be found on the system telephone label.
: You see the current version of the software on the system telephone.
:The date of the last software.
: The connection type of the Up0 or S0 system telephone.
: The device type of the system telephone.
: The system telephone's call number.
Use the softkey or the "Left" Navigator to return to the
bintec elmeg GmbH
menu.
System telephones elmeg S560 / elmeg S530