Automatic Callback - BinTec elmeg S560 Manual

15 Dialling
Note
You can only use this function if simplex operations with system telephones have been authorised for
your internal number (MSN) in the elmeg hybird.
15.14.1 Initiate a simplex operation
15.14.2 Switch simplex operation on / off

15.15 Automatic callback

You can reach a subscriber who is currently busy or not close to his phone by using the automatic callback function.
You then receive a message stating that the extension for which a callback has been set up can now be called. This
message is displayed for external callbacks from the exchange and for internal callbacks from the elmeg hybird.
Your system telephone display then shows "Automatic callback" plus the number or name of the person you want to
speak to. As soon as you accept this notification (by lifting the receiver, for example), the selected subscriber is
called automatically.
15.15.1 Automatic callback on busy (CCBS)
When you call the desired connection, you hear the engaged tone. With "Callback on Busy" you can reach the en-
gaged subscriber once they have replaced the receiver when they finish their call.
15.15.2 Automatic callback on no reply (CCBS)
When you call them, you can, indeed, hear the ringing tone, but your partner is not near their telephone and does not
pick up. With "Callback", you can reach the subscriber as soon as they have completed a call or lifted and replaced
the receiver of their telephone.
70
The receiver is hung up.
Press the "simplex operation" function key.
If you are on a call, the other party is put on hold.
If a party to the simplex operation lifts the receiver, the connection to the party is estab-
lished and the simplex operation is ended for this party.
End the simplex operation by replacing the receiver.
The receiver is replaced or lifted or you are conducting a call.
Press the "Allow simplex operation" function key, the key's LED lights up, and the simplex
operation to your telephone is possible.
Press the "Allow simplex operation" function key again, the key's LED switches off, and
the simplex operation to your telephone is no longer possible.
Pick up receiver.
Dial the number, the subscriber is called.
bintec elmeg GmbH
System telephones elmeg S560 / elmeg S530