Connect And Adjust The Headset (Headset Not Supplied) - BinTec elmeg S560 Manual

bintec elmeg GmbH

5.6 Connect and adjust the headset (headset not supplied)

You can connect a headset to the system telephone. Please ask your dealer or consult the Internet to find out which
headsets are compatible.
The headset connector on the system telephone is an 8-pin socket. Headsets with a DSHG interface (e. g. cordless
DECT headsets) can be connected directly to the system telephone without any accessories.
5.6.1 Connect the headset
The headset is connected to the headset socket on the system telephone. You then insert the headset cable into the
cable guide and secure it beneath the cable retainers.
To connect standard headsets (4-pin conector cable, e. g. U10PS), use the headset adapter which is available sep-
arately.
5.6.2 elmeg S560 and elmeg S530 headset socket assignment
DSHG receiver
Earth (Ground)
Microphone +
Receiver (Ground)
Receiver (3.3 V switchable over resistance)
Microphone - (Ground)
V+ (3.3 V)
DSHG transmitter
5.6.3 Other settings for using a headset
You can use either the receiver or the headset to make a call. When using a headset, the following settings are re-
quired or available:
• The connected headset can be used automatically for certain operations on the system telephone.
• If you want to use the headset to automatically receive calls, set the time to automatic pickup. When you use the
elmeg hybird to configure the system telephone, set up a function key to switch automatic call pickup on and off.
System telephones elmeg S560 / elmeg S530
5 System telephone installation
9