Sound - BinTec elmeg S560 Manual

bintec elmeg GmbH
12.4.9 Auto answer
Previous steps: Menu -> Settings

12.5 Sound

12.5.1 Set the sound
12.5.1.1 Call tones
For every call number, or for all the call numbers, you can choose its own call melody and volume. You can set up
the ringtone and volume for internal calls separately on the internal connector of the elmeg hybird.
Previous steps: Menu -> Sound ->Call tones
System telephones elmeg S560 / elmeg S530
The OK key is used to save the setting, and you go back to the
Select with the Navigator.
Use the "Right" Navigator to display the next menu for the selected row.
Use the Navigator to select the row you wish to edit.
: Auto answer is switched off.
: The call is immediately accepted.
: You do not wish to accept the call immediately, but rather after a little time.
Press the +/- keys to specify the delay you want in 5 second increments. The value set is
displayed to the right in the row.
The settings range from 0 - 20.
The OK key is used to save the setting, and you go back to the
The OK key is used to save the setting, and you go back to the
Select with the Navigator.
Use the "Right" Navigator to display the next menu for the selected row.
Use the Navigator to select the entry you wish to edit.
. Further editing is done in the
Use the "Right" Navigator to display the next menu for the selected row.
You get back to the previous menu using the
menu.
menu.
menu.
/ menu.
softkey or the "Left" Navigator.
12 Menu
49