Chapter 7 Wall Mounting; Assembly Kit - BinTec elmeg S560 Manual

7 Wall mounting

Chapter 7 Wall mounting

The elmeg S560 / elmeg S530 system telephones and the elmeg T500 extension can be used as desk or wall units.
An assembly kit is required to attach them to a wall.

7.1 Assembly kit

7.1.1 Pack contents
• 10 wall brackets
• 5 receiver brackets
• 20 screws for connecting the system telephone to the wall brackets
• 10 wood screws 3x30
• 10 dowels for 5 mm holes
• 1 drilling template
7.1.2 Assemble the receiver brackets
The system telephone is supplied without the receiver brackets for wall mounting. To mount the system telephone on
the wall, the receiver bracket
it over, it can be pulled gently upwards and out.
Note
Before the wall brackets are mounted, the connections for the receiver and the headset (and the plug
on the plug power supply unit with the elmeg T500) must be plugged in.
7.1.3 Wall bracket
12
needs to be replaced by the receiver bracket from the assembly kit. To change
System telephones elmeg S560 / elmeg S530
bintec elmeg GmbH