MobileHelp Fall Button User Manual page 6

Testing Your Fall Detect Button
Please have your complete system near you at the time of testing. Press your button
■ ■
once firmly.
Your alarm will be sent to the Cellular Base Station and/or Mobile Device.
■ ■
Your Base Station will announce "Call in progress" and your Mobile device will beep,
■ ■
or depending on the version you have, it will announce "Call in progress".
Once the alarm is received by the central station, your Cellular Base Station will
■ ■
announce "Please stand by for an operator" and your Mobile Device will continue to
beep, or depending on the version you have, it will announce "Please stand by for
an operator".
An emergency operator will communicate with you through your Base Station or
■ ■
Mobile Device. Tell the operator that this is not an emergency and that you are just
testing your system. If you do not explain to the operator that you are testing your
unit, emergency help will be contacted.
note: It is important that you test your system at least once a month.
6
Fall Button™ Fall Detect Pendant User Guide