PACH & COMPANY AeGIS 9100CR200 Installation And Programming Manual page 37

FUNCTION CODE
Pach and Company
AeGIS 9000 Series
Step 3 Press # to view the tenant code (directory code), the display shows
NNNNNNNNNNNN= tenant name
XXXX= 2-digit, 3-digit or 4-digit tenant code (directory code) associated with
the name.
Step 4 Press 3 to proceed to next tenant name and return to step 3 or proceed to
step 5 or press * and the display shows
Step 5 Select another Function Code to program different field from the table or
press * to exit the programming mode.
Chapter 3
PROGRAMMING
LOCAL PROGRAMMING
Page 29