Canon IR 2420 User Manual page 105

Exxx*
Cause
Remedy
Feeder cover open/Close cover
Cause
Remedy
4
Finisher cover open/Close cover
Cause
Remedy
Frnt/Left cover open/Close cover
Cause
Remedy
Load correct paper
Cause 1
Remedy 1 Make sure that the paper size loaded in the paper drawer matches the paper
Remedy 2 Set the size for the paper drawer to match the paper you want to load into the
Cause 2
Remedy 1 Load the correct paper size into the stack bypass.
Remedy 2 Set the paper size for the stack bypass to match the paper you want to load into
4-6
List of Error Messages
An error has occurred in the machine.
Turn OFF the main power, wait for more than 10 seconds, then turn it ON again.
If this does not solve the problem, disconnect the machine and contact your
local authorized Canon dealer. (See "Service Call Message," on p. 4-11.)
* xxx stands for a number.
The feeder cover is open.
Close the feeder cover.
The front cover of the finisher is open.
Close the front cover of the finisher.
One or more covers are open.
Close all of the covers.
The paper size detected automatically by the paper drawer does not match the
actual paper size.
size set for the drawer.
drawer.
The paper size selected for the stack bypass in the Stand. Stack Bypass
(Standard Stack Bypass) menu does not match the paper size loaded in the
stack bypass.
the stack bypass.