-50.0 mm to +50.0 mm (in increments of 0.5 mm); 0.0 mm
This setting sets the page margin in millimeters or inches. The settings can be set
between -50.0 mm and +50.0 mm in increments of 0.5 mm.
Press [ ] to increase the width of the inside margin.
Press [ ] to increase the width of the outside margin.
You can specify the edge along which the margin will be created in the <Binding>
setting. To create a margin along one of the edges of the paper, use this setting in
combination with the <Binding> setting.
If this setting moves the image outside the printable area, part of the image may be
Pressing [ ] increases the setting value in 0.5 mm increments. Pressing [ ]
decreases the value by 0.5 mm. Hold down [ ] or [ ] to quickly and continuously
scroll through the values.
[ + ]
[ - ]