Auto Size Detection
1
Initializing the Printer
1-18
Settings Menu
NOTE
When a job is being processed, the Processing/Data indicator blinks on the control
panel.
Off, On
Paper of the selected size in the printer driver may be absent in any of the
machine's paper drawers. If the Auto Size Detection setting is enabled, the
machine will automatically substitute paper of an available size for the missing,
according to the following table:
Printer Driver Setting
Letter
A4
11" × 17"
A3
NOTE
The machine does not use substitute paper if the above substitute paper is not
loaded in the machine's paper drawers.
No, Yes
The menu settings can be returned to the factory defaults by initializing the printer
settings.
If <Yes> is selected, the settings are initialized. If <No> is selected, the settings
are not initialized.
IMPORTANT
Do not turn OFF the machine while the settings are being initialized, as this may
damage the machine's memory.
Substitute Paper
A4
Letter
A3
11" × 17"