Scanning From A Computer (Remote Scan) - Canon imageRUNNER 2320 Operation Manual

Other Useful Functions
Scanning from a Computer
The following is the basic procedure for remotely scanning originals and loading the scan to a computer. For more information, see the
references to other guides.
* The following screen shots may differ from the ones you see on your computer, depending on the operating system you are using.
* This function is available only if the optional Network Kit is attached.
Prepare
Scan
Ready to scan.
(Online)
Scan Standby Display
Press to switch to the Scan mode.
If the machine is in the Sleep mode, press
●
If the message <Dept. ID/Pass Input> appears, enter the
●
Department ID and password.
Dept. ID/Pass Input
ID Key after Input
When done press ID key
Dept. ID:0000001
Password:*******
If the message <Enter User ID/Pass> appears, enter the
●
User ID and password.
Enter User ID/Pass
ID Key after Input
When done press ID key
User ID:User01
Password:******
For more information, see Chapter 2, "Basic Operations," in the
Reference Guide.
35
(Power).
(Remote Scan)
Place Your Originals
Place in the feeder
Place on the platen glass
Place your originals.
Close the feeder/platen cover after placing your originals on
●
the platen glass.
To set the scan settings such as data compression or
●
gamma values, press (Additional Functions) and select
<Remote Scan Compress> or <Remote Scan Gamma>.
For more information, see Chapter 3, "Useful Functions and
Settings," in the Reference Guide.