Canon imageRUNNER 2320 Operation Manual page 33

Network Settings*
●
System Settings
Device Info Settings
Dept. ID Management
User ID Management
Network Settings
Remote UI On/Off*
●
System Settings
Dept. ID Management
User ID Management
Network Settings
Remote UI On/Off
Job Log Display
●
System Settings
User ID Management
Network Settings
Remote UI On/Off
Job Log Display
Use USB Device
●
System Settings
Network Settings
Remote UI On/Off
Job Log Display
Use USB Device
Update Firmware
●
System Settings
Remote UI On/Off
Job Log Display
Use USB Device
Update Firmware
* Displayed only if the optional Network Kit is attached.
You can specify the machine's network settings, such as interface and protocol
settings, for communication between the machine and computers on your network.
You can set whether or not to use the Remote UI of the machine. The Remote UI
enables you to operate the machine and perform settings from your computer on
the network.
You can specify whether or not to display the log using
You can set whether or not to accept jobs through the USB interface.
This function is only used when the firmware needs to be updated.
(System Monitor).
32