Rear Panel - urmet domus 1093 User Manual

2.2

REAR PANEL

1
2
3
ID
Video input BNC sockets: these are used to connect the cameras. They have 75 Ω terminals.
1
USB port: port for connecting a USB device for:
•
•
2
•
•
The port may also be used to connect a USB Hub* compatible** device
BNC AUX/VOUT socket:
3 1. Multi-screen main monitor output
2. Spot monitor output
4 Audio input RCA sockets: these are used to connect the audio source (e.g. 1090/190 microphone)
RCA AOUT socket: audio output to be connected to monitors with audio input (e.g. 1090/435,
5
1092/415, 1092/417, 1092/419).
6 RJ45 network socket: for connecting to the network via UTP cat.5 wire.
7 Extractable terminal board: for alarm inputs/outputs on all models, including RS-485 connections.
8 Power socket: use the adapter provided to power the device.
9 Power socket: use the wire provided to power the device.
10 Ground terminal/wire connector
* A USB Hub is a sort of USB port extension. The DVR is provided with one only USB port. If you want to connect
several devices (hard disk, burner, etc.), you will need to use a device called 'Hub'. This device may be plugged
directly into the DVR USB port.
** Recommended model: HUB USB 2.0 ultra compact 4 port, Trust 14591.
DS1093-014
4 5 6 7
back-up to external hard disk
back-up to CD / DVD burner
firmware upgrades
connecting a mouse
8
Figure 3: rear panel
DESCRIPTION
10
9
10