Fora V30a Read Before Use page 15

Step 4
Deleting the memory.
With " dEL " and " " symbol on the display, press and select " no "
to keep the results in memory then press SET to skip.
and select " YES " .
To delete all the results, press
Then press SET to delete all memory. " OK " is displayed in the meter,
which indicates that all data stored is deleted.
Step 5
Setting the Speaking Volume.
There are seven (7) speaking volume op-
tions to choose from. Press to choose a
volume from 0 to 7. To confirm your selec-
tion, press SET.
Volume 0 indicates that the speaking func-
tion is turned off, and " " will not display
during testing. Volume 1 to 7 indicates
speaking volume from low to high, and "
" will be displayed throughout the testing.
15