Adjusting Refrigerator Shelves; Removing Freezer Shelf; Adjusting The Door Shelves - Whirlpool ET20DK Use And Care Manual

No-frost refrigerator-freezer
Hide thumbs Also See for ET20DK:
Table of Contents

Advertisement

Adjusting the refrigerator shelves...
Shelves can be adjusted
to match the way you use
your refrigerator.
Glass shelves are strong enough
to hold bottles, milk and other heavy
food items.
GLASS SHELVES ARE
HEAVY. BE CAREFUL.
To remove glass shelves:
1.
Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace
glass shelves:
1.
Guide
the rear hooks into the slots in the shelf
supports.
2. Tilt up front of shelf until hooks
drop
into slot.
Lower front of shelf to level position.
Removing freezer shelf...
I. Lift front slightly.
2. Lift back off supports.
3. Replace
in reverse order.
Adjusting the door shelves...
TO -move door shelves:
To replace
door shelves:
1.
Lift up shelf.
1.
Tilt up front of shelf until
2. Tilt up at front.
hooks fit into slots in the
3. Pull shelf straight out.
shelf support.
2. Lower front of shelf to level
position.
3. Push shelf down.
Removing crispers and crisper cover...
PULL OUT TO STOP, LIFT THE FRONT
AND PULL AGAIN
To remove the crispers:
1.
Slide crisper
straight
out to stop, lift front, then
slide the rest of the way out.
2. Replace
in the reverse order.
To remove the cover:
1.
Push up glass insert from bottom,
then slide out
with both hands.
2. Lift front of cover frame.
3. Lift out cover frame by pulling
up and out.
4. Remove
metal cover support.
To replace
the cover:
1.
Replace
metal cover support
on wall supports
in front section
of cabinet,
2. Fit back of corner into notch supports
on walls of
refrigerator,
then lower into place.
3. Slide back of glass insert into place,
then lower
front.
7
BE CAREFUL.
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Et20dm

Table of Contents