Using Your Refrigerator; Setting The Controls; Changing The Control; Power Saving Control - Whirlpool ET20DK Use And Care Manual

Using your refrigerator
REFRIGERATO
POWER SAVING CONTROL
Setting the controls...
Controls forthe refrigerator and freezer are in the
Give the retrigerator time to cool down com-
refrigerator. When the refrigerator is plugged in for
the first time...
1.
Set the REFRIGERA-
TOR CONTROL TO 4.
mal household retrigerator usage.
2. Set the FREEZER
The controls will be set about right when milk or
Refrigerator Control adjustments range from 1 to
and turn the knob.
8. Freezer Control adjustments range from A to D.
Changing the control settings...
l
Adjust the Refrigerator Control first.
If you need to adjust temperatures In refrigerator
l
Wait at least 24 hours between adjustments.
or freezer, use the settings listed in the chart below.
l
Then adjust the Freezer Control if needed.
CONDITION: REASON:
If Refrigerator
Door opened often
Section is
Large amount of food added
TOO WARM Room temperature too warm
If Freezer Door opened often
Section is
Large amount of food added
TOO WARM
Very cold room temperature
RECOMMENDED
CONTROL SETTINGS:
Refrigerator 6
Freezer
D
Refrigerator
4
Freezer A
QUESTIONS?
[can't cycle often enough)
call your
If Refrigerator
Controls not set correctly Refrigerator 2
COOL-LINE ' Section is
for your conditions
Freezer A
service
TOO COLD
assistance
telephone
If ICE isn't Heavy ice usage
Refrigerator 4
number
MADE FAST ENOUGH Very cold room temperature
Freezer
A
(page
161.
(can't cycle often enough]
If BOTH SECTIONS Door opened often Refrigerator
6
are TOO WARM Large amount of food added
Freezer
C
Very warm or very cold
room temperatures
Power Saving Control...
1.
Use the "CONSUMES LESS ENERGY" setting when
The
Power Saving Control
on the Control Con-
humidity is low.
sole operates electric heaters around the door
2. Use the "REDUCES EXTERIOR MOISTURE" setting if
openings. These heaters help keep moisture from
moisture forms on the outside of the refrigerator.
forming on the outside of the refrigerator.
The indicator light will glow when the switch is in
POWER SAVING CONTROL
the "REDUCES EXTERIOR MOISTURE" position.
L'J..liYI: il' I
,111
,,,L L
,*,w.,.
.I II
5