Lubrication System
Oil Pump Disassembly/Assembly
(7)
(4)
(2)
NOTE
•
If any portion of the oil pump is worn beyond the specified service limit, replace the oil pump as an assembly.
•
Before installation, clean all removed parts thoroughly with clean engine oil.
•
Refer to section 4 of the Common Service Manual for inspection information.
•
Refer to page 1-3 for specifications.
Requisite Service
• Oil pump removal/installation (page 4-3)
Procedure
Disassembly Order
(1 )
Pump cover attaching screw
(2)
Pump cover
(3)
Dowel pin
(4)
Oil pump shaft
(5)
Inner rotor
(6)
Outer rotor
(7)
Oil pump body
Q'ty
Remarks
• Assembly is the reverse order of disassembly.
1
1
At installation, align the hole of the cover with the dowel
pin.
1
1
At installation, align the flat on the shaft with the flat in
the inner rotor.
1
1
1
After installation, make sure that the pump shaft rotates
freely without binding.
4-4