Advertisement
Frame/Body Panels/ Exhaust System
Separation
Remove the upper cover assembly.
Remove the two screws.
Unhook the cover claw from the hole of the front cover grille
and pull the front under cover off the assembly.
Remove the two trim clips, screw, and front cover grille from
the front upper cover.
Installation is the reverse order of removal.
Front Inner Fender A Removal/Installation
Remove the front upper cover, front cover grille and under
cover.
Remove the fender A upper mounting screws and two trim
clips.
Unhook the four fender B claws from the holes in the fender
A while pulling front side of the fender A down slowly.
Remove the front inner fender A.
Installation is the reverse order of removal.
NOTE
~stallation,
insert the claws of the fender B into thel
II
II
h~les
in the fender A securely to avoid breaking the
I
claws.
_
Front Inner Fender B/Side Cover Removal/
Installation
Remove the front upper cover assembly and front inner
fender A.
Remove the trim clip from the fuel tank under cover first.
Remove the four screws at the front inner box, then remove
the front inner fender B and under covers as an assembly.
Separation
Remove the four screws and four trim clips, then separate
the front inner fender B from both front side under covers.
(1) FRONT COVER GRILLE
,Jl)
II
£
!
i1
!
~
(4) TRIM CLIP
(5) FRONT INNER FENDER A
(3) HOLE
(1)
FRONT INNER FENDER B/SIDE COVER
(5) TRIM
CLIP
~"
' " '
(4) ,SCREWS
f'~'" ~<',.",
""=>- / \ : , • . ( /
,~
-I \"'-
,
,.~\.", ~sr'l
' , .
'''~'""
ZI
"~~=~
(6) FRONT INNER
/1'\
FENDER B
(5) TRIM CLIP
(7) SIDE COVER
Advertisement
