System Status Messages - Interlogix zerowire User Manual

• "Data entry must only contain the numbers 0 – 9"
• "Data must be a number from X to Y"
• "Improper Time Value"
• "must be 4 to 8 digits
• "You must enter a user Number between 1 and 1048575"
• "PIN digits must be between 0 and 9"
• "PIN Must be 4–8 digits from 0–9"
• "Data must not contain the following characters []"

System Status Messages

Various messages may appear on the Status screen of ZeroWire Web Server
and UltraConnect App. These are also announced by voice when the Status
button is pressed.
System
• AC power fail – The security system has lost its electricity power.
• Low battery – The security system's back up battery requires charging.
• Battery test fail – The security system's back up battery requires changing.
• Box tamper – The security system's cabinet tamper input has activated.
• Siren trouble – The security system's external siren has a problem.
• Over current – The security system is drawing too much current.
• Time and date loss The security system time and date need resetting.
• Communication fault – The security system has detected a problem with the
communication channel.
• Fire alarm – A fire alarm has been activated from the ZeroWire unit.
• Panic – A panic alarm has been activated from the ZeroWire unit.
• Medical – A medical alarm has been activated from the ZeroWire unit.
Partition Number. Partition Name
• Is On in the away mode – This partition is armed in the away mode.
• Is On in the stay mode – This partition is armed in the stay mode.
• Is ready – This partition is secure and ready to be armed.
• Is not ready – This partition is NOT ready to be armed, a zone is not secure.
• All partitions are on in the away mode – All partitions in this multi partition
system are armed in the away mode.
ZeroWire User Manual 39