Disarming; Bypass A Zone - Interlogix zerowire User Manual

Disarming

Make your way to the ZeroWire through one of the designated entry / exit doors.
Once a detector detects your presence, the entry delay will begin counting down and your
ZeroWire will repeat a warning message until a valid PIN code is entered. If a valid PIN
code is not entered by the end of the entry delay time, your sirens and communicator will
activate.
If you require more time to disarm your system, the entry time can be modified in Menu 8
by a master user. Away and Stay modes can be configured with different entry delay
times, ask your service provider for further details.
Depending on how your system has been set up, entry through a non-designated door
may cause the alarm to sound immediately for greater security.
Enter the premises through a
1.
designated entry/exit door
2.
3.
USER PIN CODE
4.

Bypass a Zone

The zone bypass menu is used to bypass (isolate) selected zones in your security system.
A bypassed zone is ignored by the system and is not capable of activating an alarm. This
option is commonly used to temporarily ignore zones that require service, or zones that
you wish to temporarily add to your "stay mode".
Whilst still offering security with the remaining zones, bypassing zones lowers your level of
security.
ZeroWire User Manual
One or more partitions
armed
ENTRY DELAY BEEPS
ENTER
Enter
PIN
All partitions
now disarmed
Approach the ZeroWire. When you are
detected, the entry warning timer will begin
and the ZeroWire will beep.
Enter your PIN code before the entry delay
expires.
All zones are now disarmed, any bypassed
zones are restored to normal operation.
7