System Status Messages
Various messages may appear on the Status screen of xGen Web Server and
UltraConnect app.
System
•
AC power fail – The security system has lost its electricity power
•
Low battery – The security system's back up battery requires charging
•
Battery test fail – The security system's back up battery requires changing
•
Box tamper – The security system's cabinet tamper input has activated
•
Siren trouble – The security system's external siren has a problem
•
Over current – The security system is drawing too much current
•
Time and date loss The security system time and date need resetting
•
Communication fault – The security system has detected a problem with the
phone line
•
Fire alarm – A fire alarm has been activated from the xGen unit
•
Panic – A panic alarm has been activated from the xGen unit
•
Medical – A medical alarm has been activated from the xGen unit
Partition Number. Partition Name
•
Is On in the away mode – This Partition is armed in the away mode
•
Is On in the stay mode – This Partition is armed in the stay mode
•
Is ready – This Partition is secure and ready to be armed
•
Is not ready – This Partition is NOT ready to be armed, a zone is not secure
•
All Partitions are on in the away mode – All Partitions in this multi partition
system are armed in the away mode
•
All Partitions are on in the stay mode – All Partitions in this multi partition
system are armed in the stay mode
•
All Partitions are ready – All Partitions in this multi partition system are secure
and ready to be armed
Zone Number. Zone Name
•
In Alarm – This zone has triggered a system alarm condition
•
Is bypassed – This zone is isolated (disabled) and will not activate an alarm
•
Chime is set – This zone is part of the chime group
•
Is not secure – This zone is not closed
•
Fire alarm – This zone has triggered a fire alarm
•
Tamper – This zone has triggered a tamper alarm
•
Trouble fault – This zone has an open circuit
xGen Installation & Programming Guide
45