Transportation - HTC 650 HDX User Manual

Introduction
HTC 650 HDX
The symbol indicates a Warning! and means that incorrect use
can result in personal injury or material damage to the machine or
accessories. If you see this symbol next to a section of text, you
must be particularly careful when reading through the text and not
carry out any stages of which you are unsure. This is to protect
you and other users and to avoid damaging the machine or other
equipment.
The symbol means Note! and indicates that material damage can
occur if the machine or its accessories are used incorrectly. If you
see this symbol next to a section of text, you must be particularly
careful when reading through the text and not carry out any stages
of which you are unsure. This is to avoid damage to the machine or
other equipment.
The symbol indicates a Tip! and indicates that you can get tips
and advice on ways to make operating your machine or associated
equipment easier, and to avoid wear. When you see this symbol
you should read the accompanying text to facilitate your work and
increase the service life of the machine.

1.4. Transportation

The appropriate way to transport the machine is to firmly anchor it
to a pallet.
The machine can also be transported by lifting equipment,
for example truck of crane, using the lifting eyes provided. In
which case, make sure that the weights are locked in the forward
position and that the handle is in its back position, see Figure
4-3 on page 18 and Figure 4-2 on page 17.
2 1.0