Own-Monitor Tab - Furuno MFDBB Installation Manual

Own-Monitor tab

5. If the MFDBB is fitted with dual monitors, choose Clone or Extended at the Dual Head mode
pull-down menu as applicable and click the [Next] button. MPU-001 can output two picture
data to the displays connected to DVI 1 and DVI 2 ports. You can choose how the picture data
is shown on two displays at here. (When a monitor is connected, choose Clone.)
Clone: Same picture is shown on two displays.
Extended: The picture is split to two screens as below.
Left-side picture: Picture from the display connected to the DVI 1 port.
Right-side picture: Picture from the display connected to the DVI 2 port.
6. Choose the DVI resolution of the display unit (Auto, SVGA, XGA or SXGA) at the DVI Resolution
pull-down menu.
Dual Display mode setting
Clone
Expanded
7. Click the [Next] button .
Picture from DVI1 port Picture from DVI2 port
Picture from DVI1 port Picture from DVI2 port
SVGA
800x600
1600x600
17
XGA SXGA
1024x768 1280x1024
2048x768 2560x1024