Global-Data Source Tab - Furuno MFDBB Installation Manual

Global-Data Source tab

The Data Source dialog box shows the sources of various nav data. In case of multiple sensors
for a nav data item, for example, several position-fixing equipment, choose the sensor to use, with
the pull-down menu.
Item
Position & SOG/COG
Heading
Speed Through Water
Water Depth
Water Temperature
Wind
Date & Time
Roll and Pitch
AIS
30.Click the [Next] button.
When the GP-330B or WS-200 is connected to the NMEA2000 network, go to the GPS Mode.
Set the WAAS, referring to the step 30. If not, go to step 31.
Choose the position-fixing sensor to use. (GP-320B, GP-310B, etc)
Choose the heading sensor to use. (SC-30, PG-500, etc.)
Choose the speed (STW) sensor to use. (DFF, etc.)
Choose the depth sensor to use. (DFF, etc.)
Choose the temperature sensor to use. (DFF, etc.)
Choose the wind sensor to use. (FI-303/501, WS-200, etc.)
Choose the date and time source to use. (GP-320B, SC-30 etc.)
Choose the motion sensor to use. (SC-30, SC-50, etc.)
Choose the AIS equipment to use. (FA-30/50/150 etc.)
Description
24