JEI MAGBEAST 2 Safety Instructions And Operator's Manual page 15

JEI SOLUTIONS LTD
2.8 Cancelling clearance
The drive and the slider can be slid up and down smoothly using the lever (1), making
the screws (2) fixing the strip to the drill body visible through the openings in the slider (5). To
loosen screws (2), the slider should be placed in such a position (using levers) so that the
openings make the screws visible. After loosening the screws slide the slider up and down
several times so that the pressure strip aligns itself and cancels clearance.
Canceling clearance
After carrying out these activities and cancelling clearance, tighten screws (2) starting
from the middle screw. The slider should be located symmetrically relative to the middle
screw. Next, tighten the neighbouring screws (2) moving the slider in the degree necessary
for making them visible.
Then, tighten screws (3) until any noticable resistance is felt. When the screw in this
position and blocked with a hexagonal key, tighten counter nut (4). The screws (3) counteract
the machining force and protect the pressure strip from shifting during operation.
Operator's manual for Drilling Machine MAGBEAST 2
MAGBEAST 2
- 14 -