Table of Contents
Advertisement
Step 4:
Anti-skating force adjustment:
Adjust the anti-skating force by positioning the weight on the appropriate groove of the anti-skating sliding
mechanism. Anti-skating downforce should be adjusted in correspondence with the tonearm downforce as
follows:
Tonearm downforce:
Lower than 13 mN or 1.3 grams
13–18 mN or 1.3–1.8 grams
18–25 mN or 1.8–2.5 grams
Connection to the amplifier
The record player has gold plated female RCA phono sockets (14) so you can substitute the interconnect cables
supplied with higher quality cables such as the Pro-Ject Connect it interconnect cables for connection to the
amplifier if you wish. Use the Phono input (sometimes labelled gram, disc or RIAA) on your amplifier. Make
sure that the phono input offers correct matching and amplification for the type of cartridge used. Line inputs
(like CD, Tuner, Tape or Video) are not suitable.
Take care about connecting the left and right channel correctly. The right channel is usually marked red, the
left channel black or white. Check the manual of your amplifier for relevant information. An earthing wire
may be connected to the screw terminal between the sockets if you encounter humming problems.
If your amplifier does not have an input suitable for phono cartridges, a separate phono amplifier stage for
MM or MC cartridges is required. It has to be connected between record player and a free line level input of
the amplifier.
For detailed product information regarding Pro-Ject Audio Systems interconnect cables and phono amplifiers
please visit our website:
www.project-audio.com
6
© Pro-Ject Audio Systems · Pro-Ject 2Xperience SB S · Revision 2015.07.30
Anti-skating groove:
1st groove from bearing
2ndgroove from bearing
3rd groove from bearing
Advertisement
Table of Contents
