Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pro-Ject Audio Systems Pro-Ject 2 Xperience
Summary of Contents for Pro-Ject Audio Systems Pro-Ject 2 Xperience
- Page 1 INSTRUCTIONS FOR USE Pro-Ject 2 Xperience...
- Page 2 © Audio Trade GmbH · Pro-Ject 2 Xperience · Revision 1.3.08/1.5.08...
- Page 3 Before starting assembly make yourself acquainted with the parts listed above and correspondingly numbered in the technical drawings above. Separately packed items are marked with an asterisk *. © Audio Trade GmbH · Pro-Ject 2 Xperience · Revision 1.3.08/1.5.08...
- Page 4 The full sound quality of the record player can only be achieved if the cartridge is correctly adjusted. Particular tools like the PRO-JECT alignment tool are required to accomplish this job properly. If you are not well acquainted with the adjustment of cartridges you are advised to call upon the willing help of your PRO-JECT dealer to accomplish this task for you.
- Page 5 (17). Connection to the amplifier The PRO-JECT 2 Xperience has gold plated female RCA phono sockets (14) so you can substitute the interconnect cables supplied with those of your choice for connection to the amplifier if you wish. Your dealer can advise you on alternative cables.
-
Page 6: Switching On And Off
(3) over the larger diameter part of the motor pulley (2). Refit the platter. To revert to 33,33 r.p.m. repeat the proceedings using the smaller step on the pulley. When the Pro-Ject Speed Box ore the Speed Box SE are used speed change between 33 and 45 r.p.m. is electronic. There is no need to move the belt manually. - Page 7 Potential incorrect use and fault conditions PRO-JECT turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included.
- Page 8 Accessories Tonearm counterweight 2 motor Feet transport screws (marked red) Feet Tonearm transport lock Power supply Platter Please remove feet bevore repacking © Audio Trade GmbH · Pro-Ject 2 Xperience · Revision 1.3.08/1.5.08...
Need help?
Do you have a question about the Pro-Ject 2 Xperience and is the answer not in the manual?
Questions and answers