Isis 2.10 And Wi-Fi - ADB M2123 User Manual

®
10. ISIS 2.10 and Wi-Fi
A Wi-Fi handheld remote is an Ethernet Node. Connecting this node to an ISIS
is similar as configuring any other Ethernet node. The configuration is done in the
point-to-point configuration.
®
It is the ISIS
Wi-Fi Remote Controller can only control one system at the time! A system being a
Stand-alone desk; or a Master/slave/screen system.
Power-up sequence: it is necessary to switch on the Wi-Fi Remote Controller (the
Pocket PC) and have the software up and running before connecting the Wi-Fi to an
®
ISIS desk.
17
The Subnet
the same; if they're different you won't be able to establish a link between the Wi-Fi
Remote and the ISIS
17
Please refer to ADB Ethernet Guide
desk that decides to link to the Wi-Fi Remote Controller unit. A
of the Wi-Fi Remote and the Subnet of the ISIS
®
lighting desk.
www.adblighting.com
ADB Wi-Fi Remote Control
®
desk must be
Manual – page 27
Issue: 1.03
®
desk