ADB M2123 User Manual page 16

ADB Wi-Fi Remote Control
The "Automatically detect" setting must be disabled; it is found in the LAN settings of
the PC. You may need to temporarily set it to Disabled:
• Check that the 'Automatically detect' setting is disabled
Your PC is now ready to configure the Access Point.
• Open the Web browser on the PC and surf to http://192.168.0.50
• Fill in 'admin'
9
This IP number is the factory default address of the Access Point; we assume it has not been
modified.
10
Default password of Access Point (factory default settings)
Manual – page 14
Issue: 1.03
10
for user name and press OK.
www.adblighting.com
9