This opens the dialogue window "IEEE 802.11b WLAN Adapter".
• Select Use specific IP address option in the selected Adapter window.
• Enter the specific IP address
IP address:
Subnet mask:
Default gateway:
Do not forget to tap 'ENTER' after the configuration
13
IP address values: 2.xxx.xxx.xxx => xxx a value between 000 and 255
14
Each node on the Network must have a private address, i.e. each node has a different address; i.e.
each node on the same network must have a different address.
The Pocket PC is a part of the ADB Lighting Network, so
its IP address must start with a 2, as required by the
ArtNet specification.
Decide on an IP address
Example: IP address 2.1.2.3
255.0.0.0
No value required
www.adblighting.com
ADB Wi-Fi Remote Control
13
.
14
Manual – page 21
Issue: 1.03
Need help?
Do you have a question about the M2123 and is the answer not in the manual?
Questions and answers