Table of Contents INTRODUCTION.................................3 FEATURES AND FUNCTIONS............................4 Key Charts ..................................5 Device Table ...................................7 INSTALLING BATTERIES..............................8 PROGRAMMING DEVICE CONTROL..........................8 SETTING UP A COMBO UNIT ............................9 SEARCHING FOR YOUR CODE............................9 CHECKING THE CODES..............................10 USING LEARNING................................10 Learning Precautions..............................10 Programming a Learned Key............................10 Deleting a Single Learning Key.............................11 Deleting All Learned Keys in a Specific Mode......................11 PROGRAMMING CHANNEL CONTROL LOCK......................11 Unlocking Channel Control............................11...
INTRODUCTION The Potenza ST Universal Remote Control by Universal Electronics is our latest generation universal remote control. Its sophisticated technology allows you to consolidate up to five of your original home entertainment remote controls into one easy-to-use product. Moreover, its packed with advanced features such as: •...
Key Charts Function Use SETUP for all programming sequences. Press POWER once to turn on or off a home entertainment device. For MASTER POWER control, see “Using the Master Power Key” on page 13. Press TV, AUD, DVD, AUX or STB once to select a home entertainment device to control.
Page 6
Function Use A , B , C , and D to access additional features on your set-top box (see set-top box manual for details). These keys are colored Red, Green, Yellow, Blue to command your PVR/DVR set-top box to instantly replay the last 7 seconds of a program you are watching.
Please refer to the table below when performing the instructions in “Programming Device Control” on page 8 or “Setting Up a Combo Unit” on page 9. After programming, the Potenza ST Universal Remote Control will be able to control the following types of devices:...
PROGRAMMING DEVICE CONTROL The Potenza ST Universal Remote Control is preprogrammed to operate the set-top box provided by your television service provider, an RCA TV, a Toshiba DVD player, an RCA VCR, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps;...
SEARCHING FOR YOUR CODE If your home entertainment device does not respond to the Potenza ST Universal Remote Control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV: 1.
(on your original remote control) that you want the Potenza ST Universal Remote Control to learn. 5. On the original remote, press and hold the key to be learned. The Potenza ST Remote Control’s LED will blink...
rapidly, then turn off. Continue holding the key on the original remote until the LED blinks twice. NOTE: If the LED displays one long blink, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit programming and review the “Learning Precautions”...
Volume Lock allows you to control the volume through the device identified as having your primary speaker(s), regardless of which mode you are using. On the Potenza ST Remote Control, Global Volume Lock is set to TV , so you can control TV volume while in the TV, DVD, AUX or STB mode.
Tune-In key. USING THE MASTER POWER KEY The Potenza ST Remote Control has a unique feature that allows you to sequentially turn up to five of your home entertainment devices on or off with a single key press.
RE-ASSIGNING DEVICE KEYS The Potenza ST Universal Remote Control can be set up to control a second device of an already-assigned type. For example, to have the unit control a TV, a set-top box, and two audio devices (for example, two audio receivers), re- assign the unused AUX key to operate the second audio device as follows: NOTE: AUX is preset at the factory to control an RCA VCR.
1. On the remote control, press and hold SETUP until the last-selected device key blinks twice. 2. Enter 9 8 0 . The last-selected device key blinks twice, pauses, and blinks twice again to confirm that all custom programming is cleared. TROUBLESHOOTING PROBLEM: Device key does not blink when you press a key.
Need help?
Do you have a question about the Potenza ST and is the answer not in the manual?
Questions and answers