Keycode List Keycode list ADB remote on Minerva middleware: Button Minerva Minerva Minerva Description Command Key Map <not mapped> setup Toggle standby mode on the set top box. power <not mapped> shift Number 1 Number 2 Number 3 Number 4...
8 for future reference. Step and Set Search Method If your device does not respond to the FOCUS 3-MODE after you have tried all the codes listed for your brand. If your brand is not listed at all, the Search Method allows you to scan through all the codes contained n the memory of the FOCUS 3-MODE.
TV during step 2. -If the original remote control of your Video recorder or DVD player does not have a POWER key, press PLAY instead of POWER during step 5. Code Blink Out Once you have Set-Up your FOCUS 3-MODE, you can blink back your Set-up Code for future reference. Press the TV key once.
For example: If you are watching a program on your DVD player, you can adjust the volume (a TV function) without pressing the TV mode key on your FOCUS 3-MODE. The table below lists some of the possibilities.
Enter the program number exactly as you would on your original remote. The FOCUS 3-MODE does not respond after pressing a key? Make sure you are using new batteries and are aiming the FOCUS 3-MODE at your device. The red light (LED) does not blink when you press a key? Replace batteries with 2 fresh, new “AA/LR6”...
Need help?
Do you have a question about the FOCUS 3-MODE and is the answer not in the manual?
Questions and answers