Programming Port - Brainchild C21 User Manual

1-3 Programming Port

1-3 Programming Port
ront
Panel
control board
pin 1
Power board
Open the housing
Top view of C91
Figure 1.2 Programming Port Overview Figure 1.2 Programming Port Overview
A special connector can be used to touch the programming port
which is connected to a PC for automatic configuration, also can be
connected to an ATE system for automatic calibration and testing.
The programming port is used for off-line automatic setup and testing
procedures only. Don't attempt to make any connection to these pins
when the unit is used for a normal control purpose.
9
Access Hole
Programming Port
UM0C911B
Rear
Terminal
C21