Brainchild C21 User Manual page 2

Warning Symbol Warning Symbol
The Symbol calls attention to an operating procedure, practice, or the
like, which, if not correctly performed or adhered to, could result in
personal injury or damage to or destruction of part or all of the
product and system. Do not proceed beyond a warning symbol until
the indicated conditions are fully understood and met.
Use the Manual Use the Manual
Installers
System Designer
Expert User
NOTE:
It is strongly recommended that a process should incorporate a It is strongly recommended that a process should incorporate a
LIMIT CONTROL like L91 which will shut down the equipment at LIMIT CONTROL like L91 which will shut down the equipment at
a preset process condition in order to preclude possible a preset process condition in order to preclude possible
damage to products or system. damage to products or system.
Information in this user's manual is subject to change without notice.
This manual is applicable for the products with software version This manual is applicable for the products with software version
23 and later version. 23 and later version.
a
Copyright April 2003, The Brainchild Corporation, all rights
reserved. No part of this publication may be reproduced, transmitted,
transcribed or stored in a retrieval system, or translated into any
language in any form by any means without the written permission of
the Brainchild Corporation.
2
Read Chapter 1, 2
Read All Chapters
Read Page 12
UM0C911C