Before Fi Rst Use; Unpacking The Product Contents; Assembling The Machine - Vitalmaxx HM-001 Instruction Manual

Before fi rst use
Before you can use the machine, you must:
• unpack the product contents,
• assemble the machine,
• adjust the size of the pedal straps if necessary.

Unpacking the product contents

ATTENTION!
❐ Keep children and animals away from the packaging material. Danger of suffocation
exists!
• Unpack all parts and make sure that the product contents are complete (see chapter
"Scope of delivery") and check for any damages from transport. If you identify dam-
ages to the components, do not use them (!), instead contact our customer service
centre.

Assembling the machine

1. Remove all parts from the packaging and carefully lay them out on an even fl oor. As
a precautionary measure, set down a protective foil to prevent any damage to sen-
sitive surfaces. Remove all packaging materials from your work area. Only dispose
of the packaging material once you have checked to make sure all parts have been
delivered, that there are no transport damage present and once you have fi nished
assembling the machine. Follow the steps in these instructions to avoid improper
assembly and use:
4. Make sure that all parts are securely attached to the machine before you use it!
2. Screw the support feet onto the bottom of the main unit.
Use the enclosed mounting materials for this purpose.
3. Use the enclosed spanner to turn the pedals or handles
into the holders until secure. In the process, make sure
that the L (left) and R (right) marks on the pedals/handles
and holders match.
The right pedal/right handle (right-hand thread) is screwed
in a clockwise direction until secure.
The left pedal/left handle (left-hand thread) is screwed in a
counter-clockwise direction until secure.
20