Use Of The Seat Belt; Use Of The Quick Release Rear Wheel - Excel Mobil User Manual

5.8 Use of the seat belt

Your wheelchair is equipped with a seat belt which you can use the following way:
When in the wheelchair, you can fasten the belt by clicking the two loose ends

together, photo 12;
If the belt is too loose or too tight you can make it more secure by pulling the

short loose strap. If you wish to loosen the safety belt you should pull the long
loose strap;
To release the seat belt, you press the red button with 'press' printed on.


5.9 Use of the quick release rear wheel

Removing the rear wheel
The rear wheels of the wheelchair are removable by using the 'quick-release' system:
Stand next to the wheelchair;

Tilt the wheelchair away from you;

Press the black button in the middle of the rear wheel, photo 13 and pull the

rear wheel towards you.
To replace the rear wheel you should follow the above steps in reversed order. Check
if the wheels are correctly locked before using the wheelchair.
Photo 12
Photo 13
© 2014 VAN OS MEDICAL UK Ltd., Excel House, 2 Ashbrooke Park
~ 17 ~
User manual
, Lincoln Way, Sherburn in Elmet,North Yorkshire, LS25 6P
Tel. +44-(0)1904-720170, Fax +44-(0)1904-720398,
E-mail: sales@vanosmedical.com, www.vanosmedical.com
info@vanosmedical.nl, www.vanosmedical.com