Testing The Water Temperature Setting And Program Switch - Kärcher HDS Middle series Service Manual

HDS Middle Range / HDS Premium Range

3.1.6 Testing the water temperature setting and program switch

Function
55 °C ENCPROGTEST
This function can be
used to test the program
switch and the regulator
for the
temperature setting.
All 10 LEDs light up on
switching on.
The test is started by
actuating the Inching
function of the Ser-
vice switch (continue
turning to „SET"
position and let go)
and by turning the
water temperature
setting to 30 °C.
If the water temperature
setting is gradually
increased the LED
display changes as
shown on the right.
Service Manual 04.2008
Setting
LED display
water
Basic Settings and Service Procedures
Meaning
30 °C
35 °C
40 °C
45 °C
50 °C
55 °C
60 °C
65 °C
70 °C
75 °C
Page 67 / 127