Burner Services - Kärcher HDS Middle series Service Manual

HDS Middle Range / HDS Premium Range
3.1.15

Burner services

Function
100 °C SCTR_BRENNER
Burner service display.
The value is displayed
by the LEDs, digit for
digit, whereby each LED
stands for a numerical
value from 0 to 9
according to its number.
The display is repeated
after a pause.
Example:
The burner has been
serviced 4 times since
the initial operation of the
unit.
The LEDs light up in the
following order:
- PAUSE -
100 °C When the unit is switched on the burner operating time since the burner service
+ (SI_BRENNER) is set to „0", the burner service counter (SCTR_BRENNER) is
„SET" increased by 1 and the fault memory is deleted.
Service Manual 04.2008
Value
LED display
.
.
.
Basic Settings and Service Procedures
Meaning
Numerical value „0"
Numerical value „1"
Numerical value „2"
Numerical value „3"
Numerical value „4"
Numerical value „5"
Numerical value „6"
Numerical value „7"
Numerical value „8"
Numerical value „9"
Page 79 / 127