Functional Diagram, Suction Feed Operation - Kärcher HDS Middle series Service Manual

Unit Function

2.25 Functional diagram, suction feed operation

1 Cleaning agent tank 1
2 Cleaning agent suction hose with filter
3 Level sensor, cleaning agent tank 1
(optional)
4 Cleaning agent suction hose with filter
5 Level sensor, cleaning agent tank 2
(optional)
6 Cleaning agent tank 2
7 Suction hose with filter and non-return
valve (optional)
8 Open tank
9 Cleaning agent solenoid valve 2 (optional)
10 Cleaning agent solenoid valve 1 (optional)
11 Cleaning agent metering valve
12 Cleaning agent suction hose
13 Cleaning agent non-return valve
14 Pressure switch, „ON"
15 Pressure and flow control valve
16 Oil reservoir
19 Fuel filter
20 Fuel tank
21 Level sensor, fuel tank
22 Fuel suction line
23 Fuel return line
24 Fuel pump
25 Solenoid valve, fuel pump
26 Continuous-flow heater
27 Fuel pressure line
28 Ignition electrodes
29 Fuel nozzle
30 Exhaust connecting sleeve
31 Exhaust temperature sensor
32 Adjustment, water temperature
33 Printed circuit board
34 Temperature sensor
35 Heating coil, continuous flow heater
36 Air flap, air volume adjustment
37 Fine water filter
38 Burner fan
39 Motor housing with cooling coil (in water-
cooled motor only)
40 Pressure switch, „OFF"
41 Safety block with low-water protection
and safety valve
42 Pressure gauge
43 Pressure pipe
Page 56 / 127
HDS Middle Range / HDS Premium Range
44 Solenoid valve, scale inhibitor
45 Level sensor, scale inhibitor tank
46 Scale inhibitor tank
47 Float valve
48 Float tank
49 High-pressure nozzle
50 Spray lance
51 Softgrip easy-press handgun
52 High-pressure hose
53 Rotary control for pressure and flow
control valve
54 Rinsing line
55 Plug for closing off the rinsing line during
suction operation
56 Hose from float tank to the pump head
57 Hose from the motor cooler to the fine
water filter/pump head
Note
During suction operation the float tank Item
48 must be bypassed.
Procedure:
– Remove hose (56) at the pump head.
– Remove hose (57) from the fine water
filter.
– Connect hose (57) to the pump head.
– Pull rinsing line off the suction tube and
push onto plug (55).
Service Manual 04.2008