Specifications - PowerBox Systems 40/16 Operating Instruction

You can also use the voltage control of our POWER BOX 40/16 in order to check
for any defect cables, plugs and switches etc. If one of these components is
damaged, a higher voltage drop is displayed by the LEDs. It is important that you
repair the damage indicated before getting your model airplane airborne again.
Our Dual-Power-Control system provides each of the four receiver line-outs with a
powerful precise servo-pulse-amplifier. On the one hand you are able to connect up
to eight servos on just one channel. Long cables runs used for servos in the wings
of large models will not cause you any problems when used with the Power-Box
40/16. This is because all of the servos connected to your Power Box will receive
an exact impulse with complete amplitude due to the precision of the amplifiers
used.
The servo-pulse-amplifier also protects the receiver from interference pulses, which
are produced when using such long servo-cables. This feature also provides an
even higher level of flight security.
2.

Specifications

Working voltage:
Power supply:
Power input:
Voltage loss:
Servo-connections:
Max constant current:
Temperature range:
Size:
Weight:
4 V to 8 V
2 NiCd respectively NiMH accu packs
with 4 or 5 cells
approx. 230 mA
approx. 0.25 V
16 slots with up to 2 servos each
2 x 20 A
-10° C to +55° C
91 x 65 x 18 mm (without base plate)
77:grams.
- 4 -
POWER BOX 40/16