Stand Installation Instruction - TAMUZ KVM 9050W Operation Manual

Stand Installation Instruction

Stand Installation Instruction
This base stand installation is for KVM-1750W, KVM-2230W and KVM-2430W only
1. Screw up the base stand with 3mm x 4mm black bolts. See Picture 1:
2. See Picture 2, Picture 3 and Picture 4:
Use the screw the bolt (Mark 2) with black thin gasket (Mark 3), screw through the side bracket, then put
a black thick gasket (Mark4). Then screw this bolt to the monitor side screw hole accordingly, totally 4
bolts to screw.
Please note that in Picture 3, the L1 length is shorter than L2. L1 is for the front side and L2 for at the
back side.
© 03.14 TAMUZ Broadcast
Picture 1
Picture 2
Digital Broadcast Monitor
OSPREY G3 Series
Page - 34 -