Controls And Their Functions; Front Panel - TAMUZ KVM 9050W Operation Manual

Controls and their Functions

Controls and their Functions

Front Panel

The monitor is equipped with a operation keyboard and some indicators at the front.
Below listed the function of all keys.
# Name
1 Tally Light
2 Power Button
and Indicator
3 SDI1
4 SDI2
5 Video/YC
6 YPbPr
7 DVI/VGA
8 ASPECT
9 MARKER
10 AUDIOMETER Press this button to enable the audio level meter on screen. Push twice to select
© 03.14 TAMUZ Broadcast
This lamp is controlled by the tally function of the RS232 port, with two colors red
and green.
When the external DC power supply with electricity, the indicator light is red.
Press this POWER button to power on the monitor, and the indicator light
•
turns blue.
Press this button again turn off the monitor power supply.
•
Press this button to select the digital video SDI1 signal input
Press this button to select the digital video SDI2 signal input
Press this button to select the analog video input signal and toggle between Video
and S-video input
Press this button to select the analog component video signal and toggle between
YCbCr, YPbPr, RGB input
Press this button to select the digital or analog computer video input and toggle
between DVI/HDMI/VGA signals input
Press this button to toggle between the different aspect ratios
When the screen is single window picture, press this button for shortcut to show
Marker display, and press this button again to clear Marker from screen. (For ex-
act marker size, please choose in the OSD menu)
between horizontal and vertical bars.
OSPREY G3 Series
Description
Digital Broadcast Monitor Page - 21 -