Factory Reset - TAMUZ KVM 9050W Operation Manual

OSD Menu
Menu item
V Frequency
Color Temperature
Image Size
Scan Mode
CTI
Screen Saver
Power Saving

Factory Reset

This function is to reset the monitor to factory preset settings.
Please try to reset the monitor, when the following situations happen:
• The monitor parameters are adjusted incorrect by user.
• The monitor picture or sound is abnormal, and not due to hardware problem.
To do factory rest, please do the following steps:
• Press MENU button to enter main menu
• Select the item SETUP
• Select the item Factory Reset
• Follow the instruction to turn the direction button, the screen will refresh.
• Power off the monitor, and must wait for at least 5 seconds then restart the monitor. The monitor
resets to factory preset.
© 03.14 TAMUZ Broadcast
V frequency of the current window's input signal
Current Color Temperature
Current selected image size
Current scan mode
Color Transient Improvement mode status
System screen saver mode status
System power saving mode status
Note: Use the FACTORY RESET in any case the monitor works not as expected.
OSPREY G3 Series
Description
Digital Broadcast Monitor Page - 31 -